Pdkj Spot Welding Machine Energy Saving and Consumption Reduction 3+3 Aluminum Plate 4+4

• Control: Manual
• Cooling Way: Water Cooling
• Style: Fixed
• Model NO.: DTB-80/160/240
• Electrode Stroke: Vertical
• Electric Current: DC
• Transmission: Pneumatic
• Conductive Way: Copper
• Welding Spot Number: Single
• Type: Universal
• Applicable Material: All Metal Materials: Stainless Steel; Galv. Sheet
• Key Selling Points: Firm Welding, High Efficiency, Power Saving
• Cooling Water Flow: 14L/Min
• Input Power: 3 Phase; 380V
• Maximum Short Circuit Current: 25ka/35ka/50ka
• Transport Package: Wooden Case
• Specification: 1200*870*2210mm
• Trademark: PDKJ
• Origin: China
• HS Code: 8515809090
• Production Capacity: 100 Unit Per Month
• Package Size: 139.00cm * 104.00cm * 221.00cm
• Package Gross Weight: 809.000kg

Product Description

 

Product Description

 

PDKJ, BORN FOR METAL WELDIN

High Power ▪ Intermediate Frequency ▪ DC output current

Intermediate Frequency Inverter DC Spot (Convex) Welder
DTB-80  DTB-160  DTB-240  DTB-280  DTB-340  DTB-450

Energy saving, power saving, high efficiency, low operating cost, and high welding quality.

Product overview: The medium frequency inverter DC spot welding machine converts the power frequency (50Hz) AC to the medium frequency (1000Hz) DC output. The time resolution is higher than that of the power frequency, the control accuracy is also improved, and the output current is not affected by the change of the secondary output circuit. It has high thermal efficiency, large output power rate and better welding quality. Compared with the traditional power frequency welding machine, inverter medium frequency DC welding will be efficient and energy-saving. It is a technological revolution breakthrough in the field of resistance welding.
 

Welding Advantages of PDKJ Intermediate Frequency Inverter DC Spot Welder

1. Easy to operate
No skill training required, easy to operate, and easy to master for beginners.

2. Design life 20 years
It is designed for the lifespan of 20 years, with over 100000 hours of intensive work and aging testing in industrial laboratories.

3. Good quality
The surface of the welding spot has few oxidation and deformation, even without any marks, and the welding is firm and has good quality.

4.Widely used
Metal cabinets, automotive components, fasteners, electronic components, instruments and meters, battery spot welding, hardware spot welding, electrical switches, terminal wires, wire mesh, mesh baskets, etc.

5. Fast welding speed
High power, fast dotting speed, short time consumption, high welding efficiency.

6.  Customized
Can be customized fixtures, electrode arms, electrode holders, and electrode heads of different sizes for different product work-pieces, and can customize highly automated welding equipment and production lines.

 

Q1: Which welding techniques are suitable for fabricating enclosures?

A1: Suitable welding techniques for fabricating enclosures include:

• Resistance Spot Welding (RSW): Utilizes high current and pressure for localized heating, creating strong fusion bonds without filler material.
• Seam Welding (SW): A continuous variant of RSW, suitable for longer, linear welds on enclosures, offering high-speed, automated joining.

Q2: What precautions should be taken when using a vertical spot welder for welding enclosures?

A2: When using a vertical spot welder for welding enclosures, precautions should include:

• Ensuring compatibility with the specific material and thickness of the enclosure components.
• Thorough surface preparation to remove contaminants, oxide layers, and ensure proper electrical contact.

 

Product Parameters

Parameters of PDKJ Intermediate Frequency Inverter DC Spot Welder (1)
 

parameter	DTB-80	DTB-160	DTB-240
Rated capacity	80KVA	160KVA	240KVA
Input power	3 φ 380V	3 φ 380V	3 φ 380V
short-circuit current	25KA	35KA	50KA
Load duration	20%	20%	20%
control mode	Primary / secondary constant current	Primary / secondary constant current	Primary / secondary constant current
Inverter frequency	1000HZ	1000HZ	1000HZ
Arm extension size	500 × 350mm	500 × 350mm	500 × 350mm
press	6000N	6000N	12000N
Electrode stroke	80mm	80mm	100mm
Cooling water flow	12L/min	12L/min	14L/min
Welding capacity /Al. plate	2.0+2.0mm	2.5+2.5mm	3.0+3.0mm
Welding capacity / carbon steel	2.5+2.5mm	3.0+3.0mm	4.0+4.0mm
Electrode arm size	φ 59x173mm	φ 59x173mm	φ 74x195mm
Electrode holder size	φ 24.6 × 180mm	φ 24.6 × 180mm	φ 31.6 × 250mm
Electrode head size	φ 16x50mm	φ 16x50mm	φ 20x60mm
weight	336kg	384kg	733kg
Overall dimension	1180*750*1830mm	1180*750*1830mm	1205*870*2140mm

Detailed Photos

Characteristics of PDKJ Intermediate Frequency Inverter DC Spot Welder 
 

1. PDKJ MFDC Controller
The intermediate frequency welding controller and current closed-loop control can control the actual welding current at high speed. The output current is DC, and the current is smooth, the inductance reactance is zero. The working frequency is 1000Hz, and the time control accuracy is 1ms. The welding program can achieve multiple welding functions such as preheating, welding, and tempering to achieve complex welding functions. Humanized design, can save multiple welding presets.
 

2.LCD touch screen
The interface is simple and beautiful, and the operation is simple. Multi language switching between Chinese and English, with clear welding parameters at a glance. Cooperate with preset functions to achieve fast welding.
 

3. Water cooling circulation system
Transparent and intuitive water flow meter for easy observation and adjustment of cooling water flow. PDKJ customized anti-corrosion and anti-aging soft water pipes have a long service life and prevent water leakage accidents. Stable and appropriate temperature can improve welding quality and speed.
 

4. Thickened and stable body design
The body is designed with a high-strength thickened steel plate mechanical structure, which is stable and rigid, ensuring that the body does not vibrate during welding, and large welded work-pieces do not shake. The high-strength corrosion-resistant nano coating body can ensure machine quality and ultra long service life. And it won the Red Dot, known as the "beautiful spot welder".
 

5. Pure copper transformer
The transformer of PDKJ is made of pure copper for both primary and secondary poles, with a high conductivity magnetic core and high-quality epoxy resin poured inside. It has good insulation performance and stable performance, and is packaged in a stainless steel shell, with a compact and beautiful appearance. The rectifier component adopts high-power ABB diodes, with stable performance and high efficiency, making it the most reliable heart of PDKJ spot welding machine.
 

6. Precision and flexible welding platform
The welding platform adopts high conductivity brass material with the copper content of  85%, integrated electrode voltage mechanism, short gas path, compact structure, fast reaction speed, and more convenient installation and maintenance. The stroke between electrodes is adjustable, which can greatly improve the welding speed. Internally, it adopts water-cooled circulation for heat dissipation, and can quickly replace welding fixtures and electrode heads.
 

7. R&D Pneumatic system
The seventh generation pressure stabilizing cylinder developed specifically for welding has fast response speed, high pressure resistance, and long service life, meeting the needs of high-speed welding. The cylinder directional valve adopts SMC/Airtag triple body, with fast response speed and large flow rate, meeting the requirements of high-speed management.
 

8. Safe and reliable circuit system
The body comes with an LS air switch, and the circuit design fully complies with the humidity breakdown voltage standard for electrical equipment air gaps. The body is equipped with an emergency stop button. All electrical designs strictly comply with safety standards from China, the European Union, and North America.
 

 
Cooling component of spot welding machine
 

Stainless steel water tank and water pump (optional)

Large capacity water tank, stainless steel shell for heat dissipation, combined with high-power water pump, using room temperature water circulation cooling. This standard cooling component can meet welding operations with general strength. Maintaining the spot welding machine at the optimal working temperature can improve welding quality and accuracy, and extend the service life of the machine. It's recommended to use spot projection welding machine with power less than 160KVA  for optional.

When the temperature is below 0ºC, please use antifreeze.
 

 

Industrial grade chiller (optional)

1.Vertical top air outlet design, easy installation and maintenance.
2.High quality brand refrigeration components, with a control accuracy of ± 1.0 ºC to ± 3.0 ºC;
3.Stainless steel multi-stage centrifugal pump and stainless steel water tank, PVC connection material, no worry of rust;
4.Multiple alarm protection functions and providing passive signal output;
5.Independently developed and produced bilingual intelligent temperature controllers in Chinese and English, with various settings and fault prompt functions, making operation simple and convenient;
6.The pure water filtration protection device ensures the safe operation of the equipment;

This advanced cooling component can meet ultra-high strength welding work. Maintaining the spot welding machine at the optimal working temperature can improve welding quality and accuracy, and extend the service life of the machine. It's recommended to use 170KVA spot projection welding machine for optional.

When the temperature is below 0 ºC, please use antifreeze.

 

Welding Automation and Non-standard Customized welding equipment

Since its establishment 18 years ago, PDKJ has designed and completed numerous cases of welding automation and production lines. It is a leading enterprise in automation technology in Dongguan, focusing on automatic welding in the fields of laser welding and Electric resistance welding. More than 3000 high-end users around the world have witnessed the common use.

  

Part of classic automation cases of PDKJ:

Anzhao Oil Heater Production Line, BYD Copper Wire Terminal Welding Machine, Leite Automobile Radiator Aluminum Parts Spot Welding Machine, Feng's Wire Mesh Welding Machine, Hettich Slide Rail Welding Machine, Qixin Side Furnace Medium Frequency Welding Machine, Huayangtong Door Plate Code Reinforcement Welding Machine, CRRC Copper Wire Welding Machine, Chongqing Linglong Small Chassis Automation Welding Machine, Nanjing Qiangli Laser Automation Production Line, etc.

Usage on site

Q1: How are welding parameters adjusted for different thicknesses of workpieces when using a vertical spot welder for welding enclosures?

Answer: When using a vertical spot welder for welding enclosures with different thicknesses of workpieces, welding parameters are adjusted as follows:

• Force (kN): Increased for thicker materials to maintain adequate electrode contact and pressure during welding, decreased for thinner materials to prevent deformation.
• Electrode size and shape: Selected based on the material thickness and joint design, larger electrodes may be used for thicker materials to provide broader heat distribution and better mechanical support.

Q2: How is operator safety ensured during the operation of a vertical spot welder for welding enclosures?
 

Answer: Operator safety is ensured during the operation of a vertical spot welder for welding enclosures through:

• Personal protective equipment (PPE): Operators wear appropriate PPE, such as gloves, goggles, and face shields, to protect against arc flash, flying debris, and UV radiation.
• Ventilation and fume extraction: Adequate ventilation systems or local exhaust hoods remove hazardous fumes and maintain air quality in the workspace.

Packaging & Shipping

Our team

Patent certificate

FAQ

1,What is the delivery time for your machines?
Answer: This depends on the complexity of the machine. Most of our standard machines are in stock, and we can shape them within seven days after receiving your payment. If you require custom machines, it typically takes 20-90 days to complete production.

2,What is the noise level of the spot welding machine? Does it meet relevant standards?

Answer: Our spot welding machine is designed with low noise levels, and under normal working conditions, the noise level is very low, fully complying with national standards and requirements. You can use it with confidence without causing noise pollution to the work environment.

3,Is the operation interface of the spot welding machine user-friendly and easy to use?

Answer: Our spot welding machine features a user-friendly operation interface designed with clear and intuitive icons and buttons, making it easy for even first-time users to quickly get started. Additionally, we provide detailed operation manuals and video tutorials to help users better master the operation skills of the equipment.

4,How is quality inspection carried out after welding on the spot welding machine?

Answer: Quality inspection after welding on the spot welding machine mainly includes visual inspection, destructive testing, and non-destructive testing. Visual inspection mainly observes the appearance quality of the weld, such as whether the weld is smooth and free of cracks, etc. Destructive testing involves mechanical property tests such as tensile and bending tests conducted on samples to evaluate the strength of the weld. Non-destructive testing includes methods such as X-ray inspection and ultrasonic testing to detect defects inside the weld. Select appropriate testing methods for quality inspection based on specific requirements and industry standards.

5,Does the spot welding machine have intelligent fault detection and alarm systems?

Answer: Yes, the spot welding machine is equipped with intelligent fault detection and alarm systems, such as alarms for high water temperature, etc. This system can monitor the operating status and parameter changes of the equipment in real-time. Once a fault or abnormal condition occurs, the system will immediately issue an alarm signal and display the fault information through the display screen or remote monitoring interface. This allows operators to quickly identify and resolve issues, ensuring the normal operation of the equipment and production efficiency.

6,Does the spot welding machine have an energy-saving mode or sleep function?

Answer: Yes, some advanced models of spot welding machines are equipped with energy-saving mode or sleep function. When the equipment is idle or not in use for a long time, the energy-saving mode can automatically reduce the power consumption of the equipment to achieve energy saving. The sleep function can automatically enter a low-power state after a period of idle time, further reducing energy consumption. These functions help reduce energy waste and operating costs.


7,
How to control welding deformation during the welding process of the spot welding machine?

Answer: Welding deformation is one of the common problems during the welding process of the spot welding machine. To control welding deformation, the following measures can be taken: Firstly, optimize welding parameters by selecting appropriate welding current, welding time, and electrode pressure to reduce heat input during the welding process. Secondly, arrange welding sequences and positions reasonably to minimize welding stress concentration. Additionally, preheating and post-heating methods can be used to improve the structure and properties of the welding joint, thus reducing welding deformation.

8,What is the after-sales service policy of the spot welding machine? Does it provide technical training?

Answer: Our after-sales service policy for the spot welding machine aims to provide comprehensive support and assurance to customers. We offer one-stop services including equipment installation, commissioning, maintenance, and technical support to ensure the normal operation of the equipment and customer satisfaction. Additionally, we provide technical training services to help operators familiarize themselves with the operation and maintenance of the equipment, ensuring optimal performance. For specific after-sales service policies and technical training arrangements, please contact our customer service team for more information.